Codul pentru bilbioteca ZigduinoSleep poate fi descăcat de aici.

/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.
 
  This example code is in the public domain.
 */
 
// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
 
#include <avr/sleep.h>
#include <avr/interrupt.h>
#include <ZigduinoSleep.h>
 
int led = 11;
int state = 0;
 
void setup() {                
 
  pinMode(led, OUTPUT); 
 
  Serial.begin(9600);
  Serial.println("Sleep test");
 
  ZigduinoSleepInit();
}
 
void loop() {
   ZigduinoSleepSet(1);
 
   //Code that is executed before sleep
   state ^= 1;
   if(state == 0) digitalWrite(led, HIGH);   
     else digitalWrite(led, LOW);
 
   Serial.begin(9600);
   Serial.println("Test");
   Serial.flush();
   Serial.end();
 
   //End of code
 
   ZigduinoSleep();
 
}